Anchor Express

POWERHOUSE Ice Eater P1000 1 HP De-Icer with 25 Foot Power Cord (230 vi=olts)

The Powerhouse Ice Eater brand of de-icers is designed to prevent ice from forming around boats, marinas, docks, and piers as well as effectively melting existing ice by breaking the surface with a continuous current of warmer bottom water. The Powerhouse Ice Eater's propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice.

Key Powerhouse Ice Eater P1000 features:

• 1 HP energy efficient high quality motor
• 115 volt, 7.0 amps, one phase, 60/50 cycle
• 25 foot quick change power cord
• Two 25 foot x 3/8' hollow braided mooring lines with shackles
• Dimensions of shipping box, 14 1/2 x 14 1/2 x 16 1/8'
• Shipping weight 45 lbs
• For large boats, marinas and heavier uses
• Can be used in place of several smaller units
• Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
• Motor shaft is 316 stainless steel, the best material for salt water application
• Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
• Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid Additional double lip shaft seal for extra protection
• Stator motor windings have double impregnation of baked insulating varnish
• Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
• Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
• Propeller is custom designed for maximum thrust and performance Propeller screws on shaft for easy removal and replacement
• Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
• Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
• Performance certified tested at our facility for proper output and leaks before shipment
• Best three year limited warranty in the marketplace
• Comes complete, just open the box, remove and install
• Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application

       
• 1 HP            energy efficient high quality motor.
       
• 115/220 volt, 7.0/3.5 amps, one phase, 60 cycle.
       
• 25 foot quick change power cord.
       
• Two 25 foot x 3/8'' hollow braided lines with shackles.            
       
• Dimensions of shipping box, 14 1/2 x 14 1/2 x 16 1/8''.
       
• Shipping weight 50 lbs.
       
• For large boats, marinas and heavier uses.
       
• Can be used in place of several smaller units.
       
• Motor housing is constructed of 16 gauge 304 stainless            steel and bronze endbell for corrosion free operation in fresh or salt            water. Motor exceeds NEMA specifications and is UL and CSA compliant,            and C.E. certified.
       
• Motor shaft is 316 stainless steel, the best material            for salt water application.
       
• Permanent split capacitor ensures quick high torque            and smooth operation, while producing the highest efficiency of a single            phase induction motor. Motor and capacitor are matched for ultimate            performance.
       
• Internal, heavy duty, hard faced mechanical seal with            stainless components immersed in dielectric lubricating fluid. Additional            double lip shaft seal for extra protection.
       
• Stator motor windings have double impregnation of baked            insulating varnish.
       
• Two heavy duty ball bearings provide support for the            rotor while being cooled with dielectric type oil.
       
• Sacrificial custom designed zinc is provided for conditions            where electrolysis may be present.
       
• Propeller is custom designed for maximum thrust and            performance. Propeller screws on shaft for easy removal and replacement.
       
• Twenty-five feet of 16/3 water and oil resistant cord            with three prong molded plug is standard. Additional length cord available:            50 and 100 feet.
       
• Heavy duty PVC custom brackets that attach motor to            shroud. All stainless bolts and locking aircraft nuts are used.
       
• Performance certified tested at our facility for proper            output and leaks before shipment
       
• Best three year limited warranty in the marketplace.
       
• Comes complete, just open the box, remove and install.
       
• Optional thermostat custom design turns Ice Eater on            when needed. Ideal for unattended application.