Anchor Express

POWERHOUSE Ice Eater P500 1/2 HP De-Icer with 25 Foot Power Cord

The Powerhouse P500 Ice Eater brand of de-icers is designed to prevent ice from forming around boats, marinas, docks, and piers as well as effectively melting existing ice by breaking the surface with a continuous current of warmer bottom water. The Powerhouse Ice Eater's propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice.

Key Powerhouse P500 Ice Eater Featurers:

• 1/2 H.P. energy efficient high quality motor with 28 pounds thrust
• 5.0 amps, 115 volt, one phase, 60/50 cycle
• 25 foot quick change power cord
• Two 25 foot x 3/8 hollow braided mooring lines with shackles
• Dimensions of shipping box 12 5/8 x 12 5/8 x 12 3/4
• Weight 36 pounds
• Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
• Motor shaft is 316 stainless steel, the best material for salt water application
• Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor. Motor and capacitor are matched for ultimate performance
• Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid. Additional double lip shaft seal for extra protection
• Stator motor windings have double impregnation of baked insulating varnish
• Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
• Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
• Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
• Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
• Heavy duty PVC custom brackets that attach motor to shroud. All stainless bolts and locking aircraft nuts are used.
• Performance certified tested at our facility for proper output and leaks before shipment
• Best three year limited warranty in the marketplace
• Comes complete, just open the box, remove and install
• Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application

Now available in
Dual Voltage: 115/220
and
Dual Cycle: 60/50

• 1/2 H.P. energy efficient high quality motor with 28 pounds thrust
• 5.0 amps, 120 volt, one phase, 60 cycle.
• 25 foot quick change power cord.
• Two 25 foot x 3/8 hollow braided lines with shackles
• Dimensions of shipping box 12 5/8 x 12 5/8 x 12 3/4
• Weight 40 pounds.
• Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified.
• Motor shaft is 316 stainless steel, the best material for salt water application.
• Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor. Motor and capacitor are matched for ultimate performance.
• Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid. Additional double lip shaft seal for extra protection.
• Stator motor windings have double impregnation of baked insulating varnish.
• Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil.
• Sacrificial custom designed zinc is provided for conditions where electrolysis may be present.
• Propeller is custom designed for maximum thrust and performance. Propeller screws on shaft for easy removal and replacement.
• Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard. Additional length cord available: 50 and 100 feet.
• Heavy duty PVC custom brackets that attach motor to shroud. All stainless bolts and locking aircraft nuts are used.
• Performance certified tested at our facility for proper output and leaks before shipment.
• Best three year limited warranty in the marketplace
• Comes complete, just open the box, remove and install.
• Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.